Need a quote?+91 9819 11 11 79
Request a Quote

Home  /  Locations  /  Uttar Pradesh

Amines for Noida, Ghaziabad, Kanpur, Greater Noida and Agra

Best Chemicals & Amines Supplier in Uttar Pradesh

Chelora Amines supplies monoethanolamine, morpholine, triethylamine, aminoethylethanolamine, octadecylamine, N-methylmorpholine and 41 more amines to electronics, leather, detergent, sugar, foundry and footwear plants across Uttar Pradesh. Every dispatch carries COA, MSDS/SDS and HSN code details.

Batch check before dispatchScanning
Retention time Signal 1.2 minEDA 2.4 minMorpholine 3.5 minCHA 4.6 minMEA 5.8 minDEA 6.9 minTEA
Product
TriethanolamineMonoethanolamineMorpholineEthylenediamineCyclohexylamine
Destination
NoidaKanpurGhaziabadAgraGreater Noida
PaperworkCOA, SDS, HSN
19Uttar Pradesh cities and industrial areas served
47Amines across six chemical families
3Grades on major products: Commercial, LR and AR
24 hrsTypical quote response time

Built for India's most populous industrial state

Uttar Pradesh assembles phones in Noida, tans hides in Kanpur, crushes more sugarcane than any other state, casts engine parts in Agra and makes detergents, paper, glass and brassware across dozens of towns. We match our amine supply to the way each of these industries works. Learn more about us.

47amines in range
6chemical families
Tell us your requirement
47

One supplier, six amine families

Aliphatic, cyclic, alkanol, poly, aromatic and fatty amines under one purchase order, with the same paperwork every time.

COA

Documents with every dispatch

  • COA for each batch
  • MSDS/SDS with every shipment
  • HSN code details for GST
  • Packing list and batch traceability
AR

Grades that suit the job

  • Commercial, LR and AR on major products
  • Triethanolamine in technical, 85% and 99%
  • Diethanolamine in technical and 99%
  • Other grades confirmed at quotation
IBC

Packaging options

  • HDPE drums (25 L and 200 L)
  • IBC totes (1000 L)
  • Cylinders for gaseous amines
  • Tankers for monoethanolamine
NH

Dispatch across the state

Road delivery to the NCR belt via the Delhi–Noida and Eastern Peripheral corridors, to Agra and Mathura along the Yamuna Expressway, and to Kanpur, Lucknow and eastern UP along the Agra–Lucknow and Purvanchal routes.

°C

Planned for UP's weather

Summer highs pass 45 °C and winter nights drop near freezing. We advise on shaded storage for volatile amines and warm storage for products that thicken in the cold.

Cities and industrial areas we supply in Uttar Pradesh

Five hubs drive most of UP's amine demand. Each card shows what local plants make, what they buy from us and why.

NCR industrial belt

Western UP's side of the National Capital Region, packed with electronics, auto, FMCG, paint and engineering plants.

Key hub

Noida

ElectronicsPrinting and packagingApparel

One of the world's largest mobile phone manufacturing clusters, with electronics and component assembly, printing and packaging houses, garment exporters and FMCG units across its sectors and phases.

What Noida plants order
  • Amines for cleaning and stripper formulations
  • Epoxy hardeners for potting and encapsulation
  • Neutralisers for water-based inks and coatings
Key hub

Greater Noida

Two-wheelersElectronicsPharma

A planned industrial city with two-wheeler and component plants, electronics and appliance makers, pharma and FMCG units, and new estates along the Yamuna Expressway.

What Greater Noida plants order
  • Coolant amines for machining lines
  • Foundry and paint shop chemicals
  • Bases and building blocks for pharma
Key hub

Ghaziabad

EngineeringPaintsRubber

An established industrial city with engineering, steel re-rolling, paint and coating, rubber, plastics and pharma units in Sahibabad, Loni, Meerut Road and other industrial areas.

What Ghaziabad plants order
  • Neutralisers for waterborne paints
  • Antioxidant and accelerator raw materials for rubber
  • Rust inhibitors for metalworking

Kanpur and Lucknow belt

Central UP along the Ganga, with leather, detergents, textiles, fertiliser and food industries.

Key hub

Kanpur

LeatherDetergentsChemicals

UP's largest industrial city, known for the Jajmau tannery cluster, leather goods, detergent and soap makers, textile mills, chemical and fertiliser plants, and the Panki and Dada Nagar industrial areas.

What Kanpur plants order
  • Alkanolamines for detergents and soaps
  • Finishing and fatliquor amines for leather
  • Softener and chelant raw materials

Lucknow

PharmaFoodEngineering

The state capital, with pharma, food processing, engineering and distribution businesses in Amausi, Chinhat and Talkatora.

Agra and Mathura belt

The Braj region on the Yamuna, with footwear, foundries, a refinery and glass works nearby.

Key hub

Agra

FootwearFoundryEngines

One of India's biggest footwear centres for leather and synthetic shoes, alongside a large foundry and casting cluster that supplies diesel engine, pump and generator set makers.

What Agra plants order
  • Triethylamine for cold-box core making
  • PU foam catalysts for soles and insoles
  • Rubber antioxidant and accelerator raw materials

Other Uttar Pradesh cities we serve

Firozabad

Glass, bangle and glassware works with gas-fired furnaces.

Aligarh

Locks, hardware and metal finishing units.

Moradabad

Brass and metal handicraft exporters with polishing and lacquering.

Meerut

Sports goods, sugar mills and engineering.

Muzaffarnagar

Paper and board mills, sugar and steel.

Saharanpur

Paper mills, sugar and wood crafts.

Varanasi

Silk weaving, dyeing and engineering.

Prayagraj

Fertiliser, engineering and the Naini industrial area.

Gorakhpur

GIDA industrial area, fertiliser and food units.

Bareilly

Sugar mills, agro processing and furniture.

Sonbhadra

Aluminium, chemicals and thermal power.

Your plant is in another part of UP?

Send the delivery location with your enquiry and we will plan the route and pack size along with your quote.

Eight amines Uttar Pradesh buyers ask for

Detailed specifications, uses and handling notes for the products behind UP's detergents, sugar mill boilers, foundry cores, leather finishes and footwear foams. For anything else in our range, ask us for a quote.

C₂H₇NO
CAS number
141-43-5
Grades
Comm / LR / AR
Packing
Drums, IBC, tanker
Get a quote

Monoethanolamine (MEA)

A primary alkanolamine that behaves as both an amine and an alcohol. In Kanpur it goes into detergents and soaps, in Noida into electronics cleaning formulations, and at the Mathura refinery into gas treating. It is the highest-volume product in the ethanolamine family.

MW
61.08
Boiling point
170 °C
Melting point
≈ 10 °C
Flash point
≈ 86 °C
Density
1.012 g/mL
pKa
9.50

Where it is used

  • Detergents: alkalinity and ethanolamide raw material
  • Electronics: cleaning and stripper formulations
  • Refinery: CO₂ and H₂S removal
  • Metal: alkaline cleaners and degreasers

Handling notes

  • Corrosive, wear full PPE
  • Attacks copper, brass and aluminium, so use steel or HDPE
  • Freezes near 10 °C, so plan warm storage in UP winters
C₆H₁₅N
CAS number
121-44-8
Grades
Comm / LR / AR
Packing
Drums
Get a quote

Triethylamine

A volatile tertiary amine. Agra's foundries blow it through sand cores as the catalyst gas in the cold-box process, and pharma units in Greater Noida and Lucknow use it as an acid scavenger in synthesis.

MW
101.19
Boiling point
89 °C
Melting point
−115 °C
Flash point
≈ −7 °C
Density
0.726 g/mL
pKa
10.75

Where it is used

  • Foundry: cold-box core catalyst
  • Pharma: base and HCl scavenger
  • Coatings: waterborne resin neutraliser
  • Agro: reaction base

Handling notes

  • Highly flammable, earth and bond during transfer
  • Keep below 30 °C in shaded storage
  • Scrub foundry exhaust gases before release
C₄H₉NO
CAS number
110-91-8
Grades
Comm / LR
Packing
Drums, IBC
Get a quote

Morpholine

A ring amine whose volatility is close to water, so it spreads evenly through steam and condensate. That makes it a standard choice for the boilers of UP's sugar mills, distilleries and paper plants, which run hard through the crushing season.

MW
87.12
Boiling point
129 °C
Melting point
−5 °C
Flash point
≈ 35 °C
Density
1.007 g/mL
pKa
8.49

Where it is used

  • Boilers: steam-line corrosion inhibitor
  • Pharma: ring fragment in APIs
  • Rubber: accelerator intermediates
  • Wax and polish: emulsifier

Handling notes

  • Flammable and corrosive, wear full PPE
  • Miscible with water and most solvents
  • Dosing should follow your water treatment programme
C₄H₁₂N₂O
CAS number
111-41-1
Grades
On enquiry
Packing
Drums, IBC
Get a quote

Aminoethylethanolamine (AEEA)

A hybrid of ethylenediamine and ethanolamine, with a primary amine, a secondary amine and a hydroxyl group. Detergent, softener and textile auxiliary makers in Kanpur and Varanasi use it to build imidazoline surfactants and chelating agents.

MW
104.15
Boiling point
≈ 243 °C
Flash point
≈ 135 °C
Density
≈ 1.03 g/mL
Form
Viscous liquid

Where it is used

  • Softeners: imidazoline fabric softeners
  • Surfactants: amphoteric cleaners
  • Chelants: HEDTA-type raw material
  • Additives: fuel and lube intermediates

Handling notes

  • Corrosive to skin and eyes
  • Can cause skin sensitisation
  • Store closed, away from acids
C₁₈H₃₉N
CAS number
124-30-1
Grades
On enquiry
Packing
Bags, drums
Get a quote

Octadecylamine (Stearylamine)

A waxy, long-chain primary amine. It lays a thin water-repelling film on metal, which is why power and process plants use it as a filming amine, and fertiliser plants in Gorakhpur, Prayagraj and Kanpur use it to stop granules from caking.

MW
269.51
Melting point
≈ 52 °C
Boiling point
≈ 349 °C
Form
Waxy flakes
Water solubility
Insoluble

Where it is used

  • Boilers: filming corrosion inhibitor
  • Fertiliser: anti-caking agent
  • Textile: cationic softener base
  • Mining: flotation collector

Handling notes

  • Melt gently before dosing
  • Irritant to skin and eyes
  • Very toxic to aquatic life, keep out of drains
C₆H₁₈N₄
CAS number
112-24-3
Grades
On enquiry
Packing
Drums, IBC
Get a quote

Triethylenetetramine (TETA)

A linear polyamine with four nitrogens. It cures epoxy resins at room temperature, which makes it a common hardener for potting compounds, floorings and adhesives, and it is a raw material for polyamide resins and paper wet-strength chemistry used by mills in Muzaffarnagar and Saharanpur.

MW
146.23
Boiling point
≈ 266 °C
Melting point
≈ 12 °C
Flash point
≈ 129 °C
Density
0.98 g/mL
AHEW
≈ 24.4

Where it is used

  • Epoxy: hardener for potting, floors and adhesives
  • Resins: polyamide curing agents
  • Paper: wet-strength resin intermediates
  • Additives: lube oil and asphalt additives

Handling notes

  • Corrosive and a skin sensitiser
  • Exothermic with epoxy, mix small batches
  • Absorbs CO₂ from air, keep drums closed
C₁₂H₁₁N
CAS number
122-39-4
Grades
On enquiry
Packing
Bags, drums
Get a quote

Diphenylamine

Two benzene rings joined by a nitrogen. It traps the free radicals that make rubber and oil age, so it is the backbone of many antioxidants used by rubber goods makers in Ghaziabad, Meerut and Agra and by lubricant blenders.

MW
169.22
Melting point
≈ 53 °C
Boiling point
302 °C
Flash point
≈ 153 °C
Density
1.16 g/cm³
Form
Crystalline solid

Where it is used

  • Rubber: antioxidant raw material
  • Lubricants: alkylated antioxidant base
  • Dyes: intermediate
  • Chemicals: synthesis building block

Handling notes

  • Harmful if swallowed or absorbed
  • Avoid dust, use local exhaust
  • Toxic to aquatic life
C₅H₁₁NO
CAS number
109-02-4
Grades
Comm / LR
Packing
Drums
Get a quote

N-Methylmorpholine (NMM)

A mild tertiary amine built on the morpholine ring. Footwear and foam makers in Agra use it as a polyurethane catalyst, and pharma chemists use it as the base in peptide coupling and mixed-anhydride reactions.

MW
101.15
Boiling point
116 °C
Melting point
−66 °C
Flash point
≈ 14 °C
Density
0.92 g/mL
pKa
≈ 7.4

Where it is used

  • Polyurethane: foam and sole catalyst
  • Pharma: peptide coupling base
  • Fibre: NMMO solvent precursor
  • Synthesis: mild organic base

Handling notes

  • Highly flammable liquid
  • Store cool in closed containers
  • Irritant vapour, use ventilation

Need a different product or grade?

All 47 amines in our range are available across Uttar Pradesh. Tell us the application and we will recommend the right one.

Pick your industry

Choose a sector to see which amines UP plants like yours usually buy from our range, and the job each one does.

Leather and footwear

Kanpur and Unnao's tanneries and Agra's shoe makers use amines in fatliquoring, finishing, dyeing and in the PU and rubber that go into soles.

TriethanolamineEmulsifier in fatliquors and finishing formulations.
N,N-DimethylethanolamineNeutraliser for water-based finishing binders.
MonoethanolamineDegreasing and cleaning auxiliary.
AnilineStarting point for leather dyes.
EthylenediamineRaw material for sequestering agents.
N-MethylmorpholineCatalyst for PU soles and insoles.

Sugar, distillery and paper

UP crushes more sugarcane than any other state. Its mills, distilleries and paper plants run large boilers and need wet-strength and bleaching chemistry.

MorpholineSteam-line corrosion inhibitor.
CyclohexylamineCondensate neutralising amine.
N,N-DiethylethanolamineNeutralising amine for longer steam lines.
OctadecylamineFilming amine for idle boiler protection.
DiethylenetriamineRaw material for paper wet-strength resins.
EthylenediamineChelant raw material for pulp bleaching.

Electronics and IT hardware

Phone, appliance and component assemblers in Noida and Greater Noida use amines in cleaning chemistry, potting resins and coatings.

MonoethanolamineBase in cleaning and stripper formulations.
MonoisopropanolamineAlkaline component for precision cleaners.
Isophorone DiamineHardener for clear epoxy encapsulants.
TriethylenetetramineRoom-temperature epoxy potting hardener.
HexamethylenediamineBuilding block for polyamides used in connectors.

Detergents, soaps and FMCG

Detergent and soap makers in Kanpur and FMCG plants in the NCR belt use alkanolamines and fatty amines as bases, surfactant feedstocks and softener raw materials.

MonoethanolamineNeutraliser for sulphonic acid and ethanolamide feed.
DiethanolamineRaw material for foam-boosting amides.
TriethanolamineNeutraliser for liquid soaps and personal care.
AminoethylethanolamineFeed for imidazoline softeners.
TrimethylamineRaw material for quaternary ammonium compounds.
DodecylamineBase for cationic surfactants.

Foundry, engineering and metalware

Agra's casting cluster, Aligarh's lock makers and Moradabad's brassware exporters use amines in core making, coolants, cleaning and corrosion protection.

TriethylamineCold-box core catalyst.
TriethanolamineCoolant buffer and corrosion inhibitor.
DiethanolamineRust inhibitor component.
EthylenediamineChelant raw material for metal finishing.
OctylamineCorrosion inhibitor raw material.
CyclohexylamineVapour-phase protection for finished metalware.

Refinery, fertiliser and agro

The Mathura refinery, fertiliser plants in Gorakhpur, Prayagraj and Kanpur, and agrochemical formulators across the state use amines for gas treating, anti-caking and synthesis.

MonoethanolamineCO₂ and H₂S removal.
DiethanolamineAcid gas absorption.
DiisopropanolamineSelective gas treating solvent.
PiperazineActivator for CO₂ capture solvents.
OctadecylamineAnti-caking agent for fertiliser granules.
IsopropylamineHerbicide salt former and intermediate.

Rubber, polyurethane and paints

Rubber goods and sports goods makers in Ghaziabad and Meerut, PU foam and sole makers in Agra and paint plants across the NCR use amines as accelerators, antioxidants, catalysts and neutralisers.

DiphenylamineAntioxidant raw material.
CyclohexylamineSulfenamide accelerator raw material.
tert-ButylamineTBBS accelerator raw material.
HexamethylenetetramineCurative for phenolic resins and rubber.
MOCA/MBOCACurative for cast PU elastomers, handled under strict controls.
N,N-DimethylethanolamineNeutraliser for waterborne paints.

Found your sector? Get pricing for your plant.

Share the product, grade, monthly quantity and city. We reply with a quote and the documents that go with it.

Liquid range and UP weather

Each bar runs from an amine's melting point to its boiling point, the range in which it stays liquid. The two red lines mark a cold UP winter morning (5 °C) and a hot summer afternoon (45 °C).

Liquid range, melting point to boiling point Red cap on the left: may thicken or freeze in winter Red cap on the right: boils near summer temperatures 5 °C winter and 45 °C summer markers

Products flagged on the left may need drum heating or warm storage from December to February. Products flagged on the right need cylinders or cool, closed storage. Ask us before your first seasonal order.

Trimethylamine
−117 to 3 °C
Isopropylamine
−95 to 32 °C
Diethylamine
−50 to 55 °C
Triethylamine
−115 to 89 °C
N-Methylmorpholine
−66 to 116 °C
Ethylenediamine
9 to 116 °C
Morpholine
−5 to 129 °C
Cyclohexylamine
−18 to 134 °C
Monoethanolamine
10 to 170 °C
Aniline
−6 to 184 °C
Diethylenetriamine
−39 to 207 °C
Diethanolamine
28 to 268 °C
Triethanolamine
21 to 335 °C
Octadecylamine
52 to 349 °C
−120 °C0 °C120 °C240 °C360 °C

The full range: 47 amines at a glance

Every product we supply in Uttar Pradesh, laid out like a periodic table with its formula, name and CAS number. Tap any tile to open the product page, or contact us for price and availability.

A: Aliphatic (13) B: Alicyclic and cyclic (8) C: Alkanolamines (10) D: Polyamines and heterocycles (7) E: Aromatic (6) F: Fatty (3)
ACH₅NMethylamine74-89-5 AC₃H₉NTrimethylamine75-50-3 AC₂H₇NEthylamine75-04-7 AC₄H₁₁NDiethylamine109-89-7 AC₆H₁₅NTriethylamine121-44-8 AC₃H₉Nn-Propylamine107-10-8 AC₃H₉NIsopropylamine75-31-0 AC₄H₁₁Nn-Butylamine109-73-9 AC₄H₁₁NIsobutylamine78-81-9 AC₄H₁₁Nsec-Butylamine13952-84-6 AC₄H₁₁Ntert-Butylamine75-64-9 AC₆H₁₅NDiisopropylamine108-18-9 AC₈H₁₉NDi-n-Butylamine111-92-2 BC₆H₁₅NHexylamine111-26-2 BC₈H₁₉NOctylamine111-86-4 BC₆H₁₃NCyclohexylamine108-91-8 BC₁₀H₂₂N₂Isophorone Diamine (IPDA)2855-13-2 BC₅H₁₁NPiperidine110-89-4 BC₄H₁₀N₂Piperazine110-85-0 BC₄H₉NOMorpholine110-91-8 BC₅H₁₁NON-Methylmorpholine109-02-4 CC₂H₇NOMonoethanolamine (MEA)141-43-5 CC₄H₁₁NO₂Diethanolamine (DEA)111-42-2 CC₆H₁₅NO₃Triethanolamine (TEA)102-71-6 CC₃H₉NOMonoisopropanolamine (MIPA)78-96-6 CC₆H₁₅NO₂Diisopropanolamine (DIPA)110-97-4 CC₉H₂₁NO₃Triisopropanolamine (TIPA)122-20-3 CC₃H₉NON-Methylethanolamine109-83-1 CC₄H₁₁NON,N-Dimethylethanolamine108-01-0 CC₆H₁₅NON,N-Diethylethanolamine100-37-8 CC₄H₁₂N₂OAminoethylethanolamine111-41-1 DC₂H₈N₂Ethylenediamine (EDA)107-15-3 DC₄H₁₃N₃Diethylenetriamine (DETA)111-40-0 DC₆H₁₈N₄Triethylenetetramine (TETA)112-24-3 DC₈H₂₃N₅Tetraethylenepentamine (TEPA)112-57-2 DC₆H₁₆N₂Hexamethylenediamine (HMDA)124-09-4 DC₃H₁₀N₂1,3-Propanediamine109-76-2 DC₆H₁₂N₄Hexamethylenetetramine100-97-0 EC₆H₇NAniline62-53-3 EC₁₂H₁₁NDiphenylamine122-39-4 EC₁₃H₁₄N₂4,4′-Methylenedianiline (MDA)101-77-9 EC₁₃H₁₂Cl₂N₂MOCA/MBOCA101-14-4 EC₇H₁₀N₂2,4-Toluenediamine (TDA)95-80-7 EC₆H₈N₂m-Phenylenediamine108-45-2 FC₁₂H₂₇NDodecylamine (Laurylamine)124-22-1 FC₁₈H₃₉NOctadecylamine (Stearylamine)124-30-1 FC₁₈H₃₇NOleylamine112-90-3

Four steps from enquiry to your gate

Ordering is simple. Start on the contact us page and we handle the rest.

  1. 1

    Share your requirement

    Send the full chemical name, grade, quantity, packing and delivery city in UP. Write triethanolamine rather than TEA.

  2. 2

    Receive a matched quote

    We confirm grade, strength and pack size for your process and send pricing, usually within 24 hours.

  3. 3

    Paperwork is prepared

    COA, MSDS/SDS, HSN code details and packing information are readied for your batch and invoice.

  4. 4

    Delivery to your plant

    Road dispatch planned around your production, whether you are in Noida, Kanpur, Agra or further east.

Handling amines safely at your site

General guidance for receiving, storing and using amines. Always follow the SDS supplied with your batch.

Do

  • Store in a cool, shaded, well-ventilated area
  • Keep volatile amines below 30 °C in summer
  • Warm high-melting amines gently in winter before unloading
  • Earth and bond containers of flammable liquids
  • Wear nitrile or neoprene gloves and splash goggles
  • Use a face shield for bulk transfers
  • Keep the MSDS/SDS at the point of use
  • Treat amine-bearing effluent before disposal

Avoid

  • Storing amines next to acids, oxidisers or halogens
  • Copper, brass or aluminium fittings for ethanolamines
  • Open flames or sparks near flammable amines
  • Ordering by abbreviation alone, such as TEA or DEA
  • Washing spills into drains
  • Leaving drums open, since many amines absorb CO₂ and moisture

Skin contact

Flush with plenty of water for at least 15 minutes and remove contaminated clothing.

Eye contact

Irrigate for 15–20 minutes and see an eye specialist.

Inhalation

Move to fresh air and give oxygen if breathing is difficult.

Swallowed

Rinse mouth, do not induce vomiting and get emergency care.

Transport and packaging

  • HDPE drums and IBC totes
  • Steel cylinders for gaseous amines
  • Tankers for monoethanolamine

Fire and spills

  • Dry chemical, CO₂ or alcohol-resistant foam
  • Absorb with sand or earth
  • Ventilate after a gas leak

Paperwork

  • Correct HSN codes for GST
  • End-use paperwork flagged at quotation
  • COA and SDS with every dispatch

Questions Uttar Pradesh buyers ask

Practical answers for UP plants. If yours is not here, send it to us and we will reply directly.

Which chemicals do you supply in Uttar Pradesh?
We supply 47 amines across six families: aliphatic amines such as triethylamine, cyclic amines such as morpholine and N-methylmorpholine, alkanolamines such as monoethanolamine and aminoethylethanolamine, polyamines such as triethylenetetramine, aromatic amines such as diphenylamine, and fatty amines such as octadecylamine. The full range is on this page.
Do you supply Noida and Greater Noida?
Yes. We supply electronics, packaging, two-wheeler, pharma and FMCG plants in Noida and Greater Noida, including monoethanolamine, isophorone diamine, triethylenetetramine, monoisopropanolamine and N-methylmorpholine.
Can you deliver to Ghaziabad?
Yes. Paint, rubber, engineering and pharma units in Sahibabad, Loni and other Ghaziabad industrial areas can order from our full range, including DMEA, diphenylamine, cyclohexylamine and diethanolamine.
Do you serve Kanpur's leather and detergent industries?
Yes. Tanneries and leather finishers in Kanpur and Unnao, and detergent and soap makers in Kanpur, buy alkanolamines, aminoethylethanolamine, ethylenediamine and aniline from our range.
Do you supply Agra's foundries and footwear makers?
Yes. Agra's casting units use triethylamine for cold-box cores, and footwear makers use N-methylmorpholine as a PU catalyst along with rubber chemicals such as diphenylamine and cyclohexylamine.
Which amines are used in sugar mill and distillery boilers?
Morpholine, cyclohexylamine and N,N-diethylethanolamine neutralise carbonic acid in condensate lines, and octadecylamine is used as a filming amine, especially to protect boilers during the off-season. Dosing should follow your water treatment specialist's programme.
Which amines go into electronics cleaning and potting?
Monoethanolamine and monoisopropanolamine are common alkaline components in cleaning and stripper formulations. Isophorone diamine and triethylenetetramine are epoxy hardeners used in potting and encapsulation compounds.
Why does triethanolamine sometimes arrive thick or solid in winter?
Triethanolamine melts at about 21 °C and diethanolamine at about 28 °C, so both can thicken or solidify on cold UP mornings. Gentle drum warming restores them without affecting quality.
What does "TEA" or "DEA" mean on an enquiry?
The abbreviations are ambiguous. TEA can mean triethylamine or triethanolamine, and DEA can mean diethylamine or diethanolamine. Please write the full name and CAS number on your enquiry.
Which grades, packing and documents are available?
Most major products come in Commercial, LR and AR grades. Packing is in HDPE drums (25 L and 200 L) and IBC totes (1000 L), with cylinders for gaseous amines and tankers for monoethanolamine. Each dispatch carries a COA, MSDS/SDS, HSN code details and packing information.
Is MOCA available, and how should it be handled?
Yes, MOCA/MBOCA is in our range for cast polyurethane elastomers. It is classified as a human carcinogen, so it must be handled in closed systems with full PPE and exposure monitoring. We share the SDS before first supply.
How do I request a quote and what is the minimum order?
Open the contact us page and share the chemical's full name, grade, quantity, packing and delivery city. Minimum quantities depend on product and packing, and we usually respond within 24 hours. You can also read about us.

Tell us what your Uttar Pradesh plant needs

We supply monoethanolamine, morpholine, triethylamine, octadecylamine and 43 more amines to Noida, Greater Noida, Ghaziabad, Kanpur, Agra, Lucknow, Mathura and beyond, with a quote and full paperwork for every order.

Include these in your enquiry

  • Full chemical name and CAS number
  • Grade or strength
  • Quantity per order and per month
  • Drums, IBC totes or tanker
  • Delivery city and site
Go to contact page